Creating a Second Loft Surface

This task shows how to create the second lofted surface at the bottom of the part.

In the illustrations below, the first loft and both sweeps have been hidden.

  1. Click the Loft icon I_LoftOnCurveNetworkP2.gif (239 bytes).

The Lofted Surface Definition dialog box appears.

  1. Select the horizontal edges on the pads as sections for the loft.

Make sure arrows point the same way.

  1. Click OK to create the surface.

The specification tree is updated to show the created surfaces.

spectreegs02.gif (1146 bytes)

 
Back Up Next