PUBLICATIONS
Dr Ahmed Kovačević, Dipl.ing
1.
The Use of Biological
Waste for the Production of Bio-Gas, Thesis presented to the University of Sarajevo in
fulfilment of the requirements for the degree of Dipl. Ing (Mech) 1986
2.
The Analysis of a Refrigerating
Screw Compressor Capacity Control, Thesis presented to the University of Tuzla in
fulfilment of the requirements for the degree of Master of Science in
Engineering, 1997
3.
Three-Dimensional Numerical Analysis of Flow Prediction in Positive
Displacement Screw Machines, Thesis presented to the City University London in
fulfilment of the requirements for the degree of Doctor of Philosophy (PhD) in
Mechanical Engineering Science, 2002
1.
C. ŽEPINIĆ, A.KOVAČEVIĆ, Statics, Students workbook, Faculty of Mechanical and Electrical
Engineering, University of Tuzla, Tuzla 1991. (In Bosnian)
2.
I.DEMIRDŽIĆ, A.IVANKOVIĆ, A.KOVAČEVIĆ, Finite Volume Stress Analysis, Lecture
notes, translation from English, FEM Tuzla, University of Tuzla, 1997
3.
I.DEMIRDŽIĆ, S.MUZAFERIJA, A.KOVAČEVIĆ, Introduction to Computational Fluid Dynamics,
Lecture notes, translation from English, FEM Tuzla, University of Tuzla, 1999
4.
A.KOVAČEVIĆ, N.STOŠIĆ, I.K.SMITH, CFD Analysis of
Screw Compressor Performance, Chapter 10 in Advances of CFD in Fluid
Machinery Design, Edited by R.L.Elder et all, Professional Engineering
Publishing, IMechE, London, UK, 2002
5.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, Screw Compressor Mathematical
Modelling and Performance Calculation, Springer, UK, 2005, ISBN-10 3-540-24275-9
Patents:
1.
Plural-Screw Machines, Application GB 0210018.8, May 2002
2.
Screw Compressor-Expander Machine, GB 0301864, December 2004
Journal Papers:
1.
N.STOŠIĆ, K.HANJALIĆ, M.IVANOVIĆ, J.KOPRIVICA, N.LOVREN,
A.KOVAČEVIĆ, Mathematical
Modelling of Screw Compressor Working Process, The paper was published in
both English and Serbocroat in the Journal for Science, Engineering and
Technology of Energoinvest Sarajevo v.20 pp 7-13, 1989)
2.
N.STOŠIĆ, K.HANJALIĆ, M.IVANOVIĆ, J.KOPRIVICA, N.LOVREN,
A.KOVAČEVIĆ, Experimental
Investigation of Screw Compressor Working Process, The paper was published
in both English and Serbocroat in the Journal for Science, Engineering and
Technology of Energoinvest Sarajevo v.20 pp 15-21, 1989
3.
N.STOŠIĆ, K.HANJALIĆ, A.KOVAČEVIĆ,
Lj.MILUTINOVIĆ, J.KOPRIVICA, N.LOVREN Computer
Aided Design of Screw Compressors, The paper was published in both English
and Serbocroat in the Journal for Science, Engineering and Technology of
Energoinvest Sarajevo v.20 pp 23-30, 1989
4.
N.STOŠIĆ, K.HANJALIĆ, Lj.MILUTINOVIĆ,
A.KOVAČEVIĆ, J.KOPRIVICA, N.LOVREN, Mathematical Modelling of Oil
Influence upon the Screw Compressor Working Cycle, The paper was published
in both English and Serbocroat in the Journal for Science, Engineering and
Technology of Energoinvest Sarajevo v.20 pp 73-79, 1989
5.
N.STOŠIĆ, K.HANJALIĆ, A.KOVAČEVIĆ,
Lj.MILUTINOVIĆ, J.KOPRIVICA, N.LOVREN, Experimental Investigation of
the Influence of Oil Injection on Screw Compressor Working Process, The
paper published in English and Serbocroat in the Journal for Science,
Engineering and Technology of Energoinvest, Sarajevo v.21 pp 73-80, 1990
6.
N.STOŠIĆ, K.HANJALIĆ, A.KOVAČEVIĆ, J.KOPRIVICA,
Z.MARJANOVIĆ Mathematical Modelling
and Experimental Investigation of the Working Process of Refrigeration Screw
Compressors, Strojarstvo Journal, Zagreb 32(1)17-25(1990)
7.
N.STOŠIĆ, Lj. MILUTINOVIĆ, K.HANJALIĆ,
A.KOVAČEVIĆ Investigation of
the Influence of Oil Injection upon the Screw Compressor Working Process,
Int. J. Refrigeration Vol 15(1992) No.4
8.
N. STOŠIĆ, I.K. SMITH, A. KOVAČEVIĆ, C.A. ALDIS, The Design of a twin-screw compressor based
on a new rotor profile, Journal of Engineering Design, London, v.8, n.4
(1997), pp.389-399
9.
N.STOŠIĆ, I.K.SMITH, A.KOVAČEVIĆ, C.A.ALDIS, Twin Screw Compressor Design and
Optimisation Based on new Rotor Profile, Journal of Mech Engineering
“Mašinstvo”, Zenica 1(1997) 3-11
10.
N.STOŠIĆ, A.KOVAČEVIĆ, Recent Developments in Screw Compressors, Journal of Mech
Engineering "Mašinstvo", Zenica v.3,n.2 1999 63-78
11.
N.STOŠIĆ, A.
KOVAČEVIĆ, I.K.SMITH, Design of Oil-Less Helical Twin Screw Machines,
Journal of Mech Engineering "Mašinstvo", Zenica v.4, n. 3, pp 63-78,
2000
12.
N.STOŠIĆ, A.
KOVAČEVIĆ, I.K.SMITH, Twin
Screw Machines to replace Throttle Valve in Refrigeration Systems,
Strojniški Vestnik, Journal of Mechanical Engineering, Vol. 8, 2001, p 484
13.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, A Strong Link in The
Development Chain, Technical Gazette, Slavonski Brod, Croatia , Vol 9, No3,4,
2002 , 41-56,
14.
A.KOVAČEVIĆ,
N.STOŠIĆ, I.K.SMITH, Three Dimensional Numerical Analysis of Screw
Compressor Performance, Journal of Computational Methods in Sciences and
Engineering, vol. 3, no. 2, 2003, pp. 259- 284
15.
A.KOVAČEVIĆ, N.STOŠIĆ, I.K.SMITH, A Numerical Study of
Fluid-Solid Interaction in Screw Compressors, International Journal of Computer
Applications in Technology (IJCAT), Vol. 21, No. 4, 2004, pp. 148-158
16.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, Rotor Interference
as a Criterion for Screw Compressor Design, Journal of Engineering Design,
London, Vol 14, No 2, 2003, 209-220
17.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, Opportunities for
Innovation with Screw Compressors, Proceedings of ImechE, Part 4, Journal
of Process Mechanical Engineering, Vol 217, 2003, 157-170
18.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, The Design of
Efficient Screw Air Compressors, Journal “Mašinstvo”, Zenica, 7(1), March
2003, pp. 12-26
19. N.STOŠIĆ,
A.KOVAČEVIĆ, I.K.SMITH, Optimisation of Screw Compressors,
Applied Thermal Engineering, 23, 2003, pp. 1177-1195
20. N.STOŠIĆ, A.KOVAČEVIĆ,
I.K.SMITH, K.V. MADHAV, Proektirovanie semeistva maslozapolneniih vintoviih
kompressorov, Compressors and Pneumatics, Moskov, Vol 1, 2003, pp 2-5
21. S.ALAGIĆ, N.STOŠIĆ,
A.KOVAČEVIĆ, I. BULJIBAŠIĆ, A Numerical Analysis
of Heat Transfer and Fluid Flow in Rotary Regenerative Air Pre-Heaters, accepted for
publication Strojniški
Vestnik, Journal of Mechanical Engineering, January 2005
22. A. KOVAČEVIĆ, Boundary Adaptation
in Grid Generation for CFD Analysis of Screw Compressors, Accepted for
publication in International Journal for Numerical Methods in Engineering,
January 2005.
Referred Conference
Papers:
1.
P. KALUDJERČIĆ, A.KOVAČEVIĆ, D.LULO, Unsteady Model of a Heating System for a
Room (Building), JUREMA Symposium, Zagreb 31 (1986) 2 (in Serbo-Croatian)
p.33
2.
A.KOVAČEVIĆ, N.STOŠIĆ, Measuring and Acquisition of Screw Compressor Data, JUREMA
Symposium, Zagreb 1988 (in Serbo-Croatian) p.222
3.
N.STOŠIĆ, A.KOVAČEVIĆ, K.HANJALIĆ, Lj.
MILUTINOVIĆ, Mathematical Modelling
of the Influence of Oil on the Working Cycle of Screw Compressors, XIV
Compressor Technology Conference at Purdue, Lafayette, USA 1988.
4.
N.STOŠIĆ, K.HANJALIĆ, J.KOPRIVICA, Z.MARJANOVIĆ,
A.KOVAČEVIĆ, Analysis of
Refrigerating Screw Compressors by Mathematical Modelling, "Clima
2000" Congress, Sarajevo 1989 p.266
5.
N.STOŠIĆ, Lj.MILUTINOVIĆ, K.HANJALIĆ,
A.KOVAČEVIĆ Experimental
Investigation of the Influence of Oil
Injection Upon the Screw Compressor Working Process, XV Compressor
Technology Conference at Purdue, Lafayette, USA 1990.
6.
N.STOŠIĆ, A.KOVAČEVIĆ, Lj.MILUTINOVIĆ, M.FAVARO, Construction, Production and Manufacturing
Control of Two-Stage Screw Compressor XIV Symp. of Informatics, Jahorina
1990 (in Serbo-Croatian) p.76
7.
Lj.MILUTINOVIĆ, N.STOŠIĆ, A.KOVAČEVIĆ, Experimental Investigation of Oil Influence
to the Screw Compressor Process JUREMA Symposium, Zagreb 1990 (in
Serbocroat) p.141
8.
N.STOŠIĆ, A.KOVAČEVIĆ, DŽ.TUFEKČIĆ, Screw Compressor, High Technology Product -
Mathematical Modelling and Experimental Investigation (in Bosnian), II
Symp. Zenica 1994
9.
D.SPREČIĆ, A.KOVAČEVIĆ, I.MARINOVIĆ, The problems of mechanical part shapes
design and modelling by computer (in Bosnian), I International research
conference "Trends in the Development of Machinery and Associated Technologies",
Zenica 1994
10.
S.ALAGIĆ, A.KOVAČEVIĆ, Heat pumps in laboratory and semi-industrial plant systems (in
Bosnian), I International research conference "Trends in the Development
of Machinery and Associated Technologies", Zenica 1994
11.
N.STOŠIĆ, K.HANJALIĆ, A.KOVAČEVIĆ, Twin-Screw Compressor Profile Development
and Optimisation by Computer Modelling (in Bosnian), II International
research conference "Trends in the Development of Machinery and Associated
Technologies", Zenica 1995, p.417
12.
K.HANJALIĆ, N.STOŠIĆ, A.KOVAČEVIĆ, Application of Mathematical Modelling of
Screw Machines to the Optimisation of Lobe Profiles, "Design 96"
Symp. Opatija 1996
13.
A.KOVAČEVIĆ, N.STOŠIĆ, Modelling of refrigerating Screw Compressor Capacity Control, 1st
symposium "Revitalisation and modernisation of the BiH industry",
Bihać, Bosnia and Herzegovina 1997
14.
N. STOŠIĆ, A.KOVAČEVIĆ, Modelling of the Influence of
Capacity Control on the Working Process of a refrigeration Screw Compressor, 2nd
International Compressor Technique Conference, Chengdu, China, August 1997
15.
N. STOŠIĆ, I K.SMITH, A.KOVAČEVIĆ, Some Aspects of Tool Design for Screw Compressor Rotor Manufacturing,
International Design Conference - Design 98, Dubrovnik, Croatia, May 1998,
707-713
16.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, Modelling of Screw Compressor Capacity Control, 1998 International
Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, July
1998, 607-612
17.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, Modelling of Screw Compressor Capacity Control, IMechE Seminar
Publication, Design, Selection and Operation of refrigerator and Heat Pump
Compressors, London, UK, November 1998, 9-30
18.
A. KOVAČEVIĆ, N.STOŠIĆ, I.K.SMITH, Development of a CAD-CFD Interface for Screw Compressor Design,
International Conference on Compressors and their Systems, London, UK,
September 1999, 757-767
19.
I.K.SMITH, N.STOŠIĆ, C.A.ALDIS, A.KOVAČEVIĆ, Twin Screw Two-Phase Expanders in Large
Chiller Units, International Conference on Compressors and their Systems,
London, UK, September 1999
20. A.KOVAČEVIĆ, N.STOŠIĆ, The development of a CAD-CFD screw
compressor interface, 2nd symposium "Revitalisation and
modernisation of BiH industry", Bihać, Bosnia and Herzegovina 1999,
Conference proceedings ISBN 9958-642-06-0, 293-300
21.
N.Stošić, A. Kovačević, I.K.Smith
Design of Oil-Less Helical Twin Screw Machines, Proceedings of International design
Conference - DESIGN 2000, Dubrovnik, Croatia, p.781-786
22. I.K. Smith,
N.Stošić, A.Kovačević Twin Screw Machines to Replace Throttle Valve
in Refrigeration Systems, Proceedings
ASME-ZSITS International Thermal Science Seminar, Bled, Slovenia, June 2000,
also Strojniški Vestnik, Journal of Mechanical Engineering, v8 p.484, 2001
23. A.
Kovačević, N.Stošić, I.K.Smith The CFD Analysis of a Screw
Compressor Suction Flow, 2000
International Compressor Conference at Purdue, Purdue University, West
Lafayette, Indiana, July 2000, p. 909-916
24. N.Stošić,
I.K.Smith, A. Kovačević, K. Venumadhav Retrofit ‘N’ Rotors for
Efficient Oil-Flooded Screw Compressor, 2000 International Compressor Conference at Purdue, Purdue University,
West Lafayette, Indiana, July 2000, p.917-924
25. A.
Kovačević, N.Stošić, I.K.Smith Grid Aspects of Screw Compressor
Flow Calculations, ASME
Congres, Orlando, Florida, November 2000
26. A.
Kovačević, N.Stošić, I.K.Smith Screw Compressor CFD Analysis, 5th International Research
Conference TMT 2000, Zenica, Bosnia and Herzegovina, October 2000
27. A.
Kovačević, N.Stošić, I.K.Smith Analysis of Screw Compressor by
Means of Three-Dimensional Numerical Modeling, International Conference on Compressor and
their System, IMechE Conference Transactions 2001-7, London, 2001, p.23-32
28. K Venu Madhav, A.
Kovačević, N.Stošić, I.K.Smith The Design of a Family of Screw
Compressors for Oil-Flooded Operation, International Conference on Compressor and their System, IMechE
Conference Transactions 2001-7, London, 2001, p.33-42
29. I.K.Smith,
N.Stošić, A. Kovačević A Feasibility Study of Throttle Loss Power Recovery in Large Heat Pumps
with Two Stage Compression, International Conference on Compressor and their System, IMechE
Conference Transactions 2001-7, London, 2001, p.391-401
30. P. McReath,
N.Stošić, I.K.Smith, A. Kovačević The Design of Efficient Screw
Compressors for Delivery of Dry Air, International Conference on Compressor and their System, IMechE
Conference Transactions 2001-7, London, 2001, p.81-91
31.
A. Kovačević, N.Stošić, I.K.Smith
Analysis of Screw Compressor by Means of 3-D Numerical Modeling, ImechE Seminar on Advances of CFD to
Compressor Machinery Design, London, Jun 2001
32. N.Stošić, I.K.Smith
A.Kovačević, Calculation of Rotor Interference in Screw
Compressors, Proceedings of the 3rd International Compressor Technique
Conference, Wuxi City China, August 2001, p.134-142
33. N.STOŠIĆ, I.K. SMITH
A.KOVAČEVIĆ, Power Recovery From Low Cost Two-Phase Expanders,
Geothermal Research Council GRC 2001, Annual Meeting, San Diego, CA, USA,
August 2001
34. N.Stošić,
A.Kovačević, I.K.Smith The Design of Efficient Air Screw Compressors, Proceedings of the 3rd
Symposium ‘Revitalization and Modernization of Metal Industry in BiH’, RIM
2001, Bihać, BiH, October 2001
35.
A. Kovačević, N.Stošić, I.K.Smith Three
Dimensional Modeling of Solid-Fluid Interaction as a Design Tool in Screw
Compressors, Proceedings of
the 7th International Design Conference DESIGN 2002, Dubrovnik,
Croatia, May 2002, p.811-616
36.
A. Kovačević, N.Stošić, I.K.Smith
Fluid-Solid Interaction in Screw Compressors, XIV Compressor conference, Purdue University, West Lafayette, Indiana,
USA, July 2002, C21-1
37.
N.Stošić, I.K.SmitH, A. Kovačević A Twin Screw Combined Compressor and
Expander for CO2 Refrigeration Systems, XIV Compressor conference, Purdue University,
West Lafayette, Indiana, USA, July 2002,
C21-2
38.
N.Stošić, A. Kovačević I.K.Smith
Optimisation of Screw Compressor Design, XIV Compressor conference, Purdue University, West Lafayette, Indiana,
USA, July 2002, C21-3
39.
A. Kovačević, N.Stošić, I.K.Smith
Numerical Simulation of Fluid Flow and Solid Structure in Screw Compressors, Proceedings of 2002 ASME Congress, New
Orleans, USA, November 2002, IMECE2002-33367
40.
A. Kovačević, N.Stošić, I.K.Smith
Influence of Rotor Deflection Upon the Screw Compressor Process, Conference on Screw Type Machines
VDI-Schraubenmachinen, Dortmund, Germany, September 2002, 17-28
41.
N.Stošić, A. Kovačević I.K.Smith Screw
Compressor: A Strong Link in the Development Chain, 1st International Conference on
Advanced Technologies for Developing Countries, Slavonski Brod, Croatia,
September 2002, 57-62
42.
A
KOVAČEVIĆ, N.Stošić,
IAN K. SMITH, E MUJIĆ, Advanced Design Tools for Screw Compressors, 2nd DAAAM International Conference
on Advanced Technologies for Developing Countries - ATDC˘03 June 25-28, Tuzla, Bosnia and Herzegovina, 2003
43. N.Stošić, A.
Kovačević I.K.Smith, Improving Refrigeration Screw Compressor
Performance with Optimized Rotors, IMechE
International Conference on Compressors and Their Systems, London, September
8-10, 2003
44. N.Stošić, A.
Kovačević, I.K.Smith, Combined
Screw Compressor-Expander in Fuel Cell Application, IMechE International
Conference on Compressors and Their Systems, London, September 8-10, 2003
45. A.
Kovačević, N.Stošić, I.K.Smith, The Application of CFD Analysis to the Design of Bifunctional
Machines, IMechE International Conference on Compressors and Their Systems,
London, September 8-10, 2003
46. N.Stošić, A. Kovačević,
I.K.Smith, Multifunctional
Screw Compressor Rotors, ICCR the 4TH International Conference on
Compressors and Refrigeration , Xi’an October 21-25, 2003
47. N.Stošić, A.
Kovačević, I.K.Smith, Combined Compressor-Expander in Fuel Cell
Application, COBEM 2003, 17th
International Congress of Mechanical Engineers, Sao Paulo, November 10-14, 2003
48. A.
Kovačević, N.Stošić, I.K.Smith, Fluid-Solid Interaction for Extension of Range in Screw Machine
Application, Advances of CFD in Fluid Machinery Design, ImechE Seminar,
London, November 18, 2003
49. A.
Kovačević, N.Stošić, I.K.Smith, Fluid-Solid Interaction in the Design of Multifunctional Screw
Machines, Proceedings of 8th International Design Conference –
Design 2004, Dubrovnik, Croatia, May 17-21, 2004, vol. 2, 1289-1295
50.
A. Kovačević, N.Stošić, I.K.Smith, Development of Management Interface for
Screw Compressor Design Tools, Proceedings of 5th International
Conference TMCE 2004, Lausanne , Switzerland, April 14, 2004
51.
S.ALAGIĆ,
N.STOŠIĆ, A.KOVAČEVIĆ, I. BULJIBAŠIĆ, A Numerical Analysis of Heat Transfer and Fluid Flow in Rotary
Regenerative Air Pre-Heaters, ASME - ZSITS
International Thermal Science Seminar, Bled, Slovenia, June 2004
52. N.Stošić, A.
Kovačević, I.K.Smith, Identification of Heat Transfer on Screw Compressor
Rotors as Tool for Their Design, HEFAT 2004, 3rd
International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics
21 – 24 June 2004, Cape Town, South Africa
53. N.Stošić, A.
Kovačević I.K.Smith, Extension
of Operating Range of Dry Screw Compressors by Cooling of Their Rotors, 17th
International Compressor Engineering Conference at Purdue, July 2004
54. I.K.Smith,
N.Stošić, A. Kovačević, An Improved System for Power Recovery from High Enthalpy Liquid
Dominated Field, (GRC Annual Meeting, Indian Wells, California, August 2004
55. A.
Kovačević, N.Stošić, I.K.Smith, Numerical Simulation of Combined Compressor Expander Machines for
Use in High Pressure Refrigeration Systems, Proceedings of SIMS 2004, Technical University of
Copenhagen, Sept. 2004. ISBN 87-7475-316-9
56. I.K.Smith,
N.Stošić, A. Kovačević, An Improved System for Power Recovery from High Enthalpy Liquid
Dominated Fields, World Geothermal Congress, Antalya Turkey, May 2005
Industrial Reports
1.
N.STOŠIĆ, K.HANJALIĆ, A.KOVAČEVIĆ et al, Development and Experimental verification of
the Mathematical Models of Screw Compressor Process in Dry and Refrigeration
Applications, "Energoinvest" SERC Project, Sarajevo 1987.
2.
N.STOŠIĆ, K.HANJALIĆ, A.KOVAČEVIĆ et al, CAD of Screw Compressors EPTM, SERC
Project for “Trudbenik” Compressor Factory Doboj (426 pages), Sarajevo 1990.
3.
N.STOŠIĆ, K.HANJALIĆ, A.KOVAČEVIĆ et al, Development of Multistage Compressor Plants
and Blowers on the Basis of Screw Compressor, EPTM Project for
"Energoinvest" Sarajevo (276 pages), Sarajevo 1990.
4.
N.STOŠIĆ, K.HANJALIĆ, S.VASIĆ, V.PRČULJ,
T.SADOVIĆ, A.KOVAČEVIĆ et al, Complex Tests of Block 3 Thermal Power Plant "Tuzla" 200 MW
Tuzla, IPES Project for the Republic Electricity Board of Bosnia and
Herzegovina (174 pages) Sarajevo, 1989.
5.
N.STOŠIĆ, K.HANJALIĆ, A.KOVAČEVIĆ et al, Tests of Working parameters of Block 1
Thermal Power Plant 'Kakanj' Ćatići, IPES Project for the
Republic Electricity Boar of Bosnia and Herzegovina (86 pages) Sarajevo, 1987.
6.
N.STOŠIĆ, A.KOVAČEVIĆ, M.BIJELIĆ, J.PRŽULJ, A Feasibility Analysis of Alternative Fuel
Combustion in The Steam Boiler 'Babcock' in TPP 'Natron' Maglaj, IPES
Project for 'Natron' Maglaj (74 pages), Sarajevo 1987
7.
N.STOŠIC, K.HANJALIĆ, A.KOVAČEVIĆ et al, Tests of Block 4 Thermal Power Plant 'Tuzla'
200 MW Tuzla, IPES Project for the Republic Electricity Board of Bosnia and
Herzegovina (196 pages) Sarajevo 1990.
8.
D.PETROVIĆ, A.KOVAČEVIĆ, LJ.MILUTINOVIĆ et al, Reconstruction study of Air distribution in
Salt-magazine in Tuzla, FEM Project for FST Tuzla, Tuzla 1991 (172 pages)
9.
N.STOŠIĆ, K.HANJALIĆ, A.KOVAČEVIĆ et al, Tests of Working Parameters of Block 7
Thermal Power Plant 'Kakanj' Ćatići, IPES Project for the
Republic Electricity Board of Bosnia and Herzegovina (187 pages) Sarajevo 1991
10.
N.STOŠIĆ, Z.MIRKOVIĆ, I.TOMIČIĆ,
A.KOVAČEVIĆ et al, An
Analytical and Experimental Study for FS Lukavac: - Determination of the Causes
of Pipe Damages on Boiler 7 -
Determination of the Life Time for the Boilers 2 and 3 - Normative Tests of
Boiler 1 to 7 IPES Project for FS Lukavac (325 pages) , Sarajevo 1992.
11.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, Screw compressor 127-5/6 main design project, City university,
London 1996
12.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, Screw compressor 119-4/6 main design project, City university,
London 1997
13.
A.KOVAČEVIĆ, S.DELALIĆ, DŽ.TUFEKČIĆ, Revision Study of the Steam boiler 2
reconstruction in TE Tuzla, FEM Tuzla, Tuzla, 1997.
14. N.STOŠIĆ,
A.KOVAČEVIĆ, I.K.SMITH, The
Design of a High Efficiency 13 cum/min Oil injected Twin Screw Air Compressor,
Report for "Kompressor Sanayavi ve Ticaret A.S. Turkey", City
university London, July 1998N.
15. N.STOŠIĆ,
A.KOVAČEVIĆ, I.K.SMITH, Full
mechanical design of an aero engine screw supercharger for Wilksch, UK, Compressor Centre, City University London 1998 (45
pages)
16.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, Full mechanical design, building and experimental
investigation of expressor for air conditioning systems, for Carrier, USA, Compressor Centre City University London 1998 (75
pages)
17.
N.STOŠIĆ, I.K.SMITH, A.KOVAČEVIĆ, C A ALDIS Theoretical
and Experimental R&D program on two-phase expressor for air conditioning
system, Report for "Carrier" USA, City University London, 2000. (85
pages)
18.
N.STOŠIĆ, A.KOVAČEVIĆ,
Full mechanical design of rotors and housings for a family of oil flooded
air screw compressors: 102 mm, 73 mm and 159 mm rotor dia for ELGI India,
Compressor Centre City University London 1999 (210 pages)
19.
N.STOŠIĆ, A.KOVAČEVIĆ, K. VENU MADHAV, Full mechanical design of rotors and housings for
a family of oil flooded air screw compressors: 225 mm and 284 mm rotor dia for
ELGI India, Compressor Centre City University London 1999 (140 pages)
20.
N.STOŠIĆ, I.K.SMITH, A.KOVAČEVIĆ, A Feasibility Study of
a Twin Screw Internal Combustion Engine, Report for "QinetiQ" UK,
City University London, March 2000.
21.
N.STOŠIĆ, A.KOVAČEVIĆ, S. SELJI, H.PRAKSAH, Full mechanical design of rotors and housings for a
family of two-stage dry air screw compressors: 102 mm, 163 and 204 mm rotor dia
for ELGI India, Compressor Centre City
University London 2001 (210 pages)
22.
N.STOŠIĆ, A.KOVAČEVIĆ, Full
mechanical design of rotors and housings for a family of two-stage oil-floded
air screw compressors (6 units) for GD USA,
Compressor Centre City University London 2002 (210 pages)
23.
N.STOŠIĆ, A.KOVAČEVIĆ, and 4 Customer engineers, Full mechanical design of rotors and housings for an
efficient refrigeration compressor 5/6-104 mm and its testing for Dalian
Refrigeration China, Compressor Centre City
University London 2002 (70 pages)
24.
A.KOVAČEVIĆ, N.STOŠIĆ, Delivery
of SCORG-Screw Compressor Grid Generator and application examples for Trane USA, Compressor Centre, City University London 2003 (80
pages)
25.
N.STOŠIĆ, A.KOVAČEVIĆ, A. TOPČIĆ, Full mechanical design of 4/5-159 mm rotors and
housings for an oil flooded 2 stage air screw compressor on one pair of rotors
for Elgi India, Compressor Centre City
University London 2003 (140 pages)
26.
A.KOVAČEVIĆ, N.STOŠIĆ, CFD
in screw compressors, internally financed research project, Compressor Centre City University London 2002 (212
pages)
27.
N.STOŠIĆ, A.KOVAČEVIĆ, E. MUJIIĆ, Full mechanical design of 4/5-59 mm rotors and
housings for an oil flooded air screw compressor for VMC Italy, Compressor
Centre City University London 2003 (140 pages)
28.
N.STOŠIĆ, A.KOVAČEVIĆ, S. PALURU, Full mechanical design of a family of two-stage dry
air screw compressors: 102 mm, 159, and 225 and 284 mm rotor dia for ELGI
India, Compressor Centre City University London 2003 (140 pages)
29.
A.KOVAČEVIĆ, N.STOŠIĆ, Delivery
of SCORG-Screw Compressor Grid Generator and application examples for CFX
Germany, Compressor Centre, City
University London 2003 (80 pages)
30.
A.KOVAČEVIĆ, N.STOŠIĆ, Fluid-solid
interaction in screw compressors, internally financed research project, Compressor Centre City University London 2003 (30
pages)
31.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, A Feasibility Study of
CvR Compressor, Report for "Outland Technologies" Canada, City
University London, November 2003.
32.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, Feasibility Study of
a Twin Screw Internal Combustion Engine, Report for "QinetiQ" UK,
Compressor Centre City University London, 2003 (46 pages)
33.
N.STOŠIĆ, A.KOVAČEVIĆ, S. ALAGIC, Modelling of
processes in Ljungstroem air pre-heaters for Thermal power plant Tuzla,
2003
34.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, Feasibility Study of
CvR Compressor, Report for "Outland Technologies" Canada,
Compressor Centre City University London, 2004 (36 pages)
35.
N.STOŠIĆ, A.KOVAČEVIĆ, I.K.SMITH, E. MUJIIĆ, Full mechanical design of 3/5-69 mm dry air screw
compressor expander and its testing for Lada Avtovaz, Russia, Compressor
Centre City University London 2004 (240 pages)